Electro Vibro Feeder

Electro Magnetic Vibro Feeder is ideally suitable for controlling the flow of bulk Materials to secondary processing operation. The resultant force output, amplitude final product conveying speed is readily adjustable on all Feeders The vibrations product are smooth uniform , volumetric flow, that is fully variable with the help of controller.

Motorized Vibro Feeder is also Heavy duty vibratory feeder have welded construction, which transmits vibrations without fatigue. They are built for continuous operation. Each vibro feeder utilizes the forces set up by two synchronized, counter-rotating, heavy-duty, unbalanced Vibratory Motors, which are firmly fixed to the Feeder trough, in a specific angle to the feeding level. Feeders with unbalanced drives vibrate freely on a support spring which is insulated against vibration transmission to base frame.

The both vibratory Feeder are used to control bulk products flow in bulk Handling plants, Like coke, Quartz, Mineral, Cement, Glass and many other industries Compared with other conveying means vibratory feeders have low energy consumption and cause little pollution. They are wear resistant and thus do not influence the quality and character of the product they handle.

Do not hesitated to contact us at http://www.excelmagnetics.com , info@excelmagnetics.com  & call us +91 79 6450 3537 , +91 79 2290 0055

Wet Magnetic Drum Separator

The Wet Magnetic Drum Separator is used to remove very fine magnetisable components from low concentration, low-viscosity liquids. The wet separator is intended for use in the metal processing industry and for the treatment of preconcentrates extracted from the high gradient magnetic filter.

The liquid flows through a semicircular separating chamber beneath a stainless steel drum to which the

magnetisable particles are attracted. The strong, high-gradient magnetic field is created by a cylinder consisting of permanent magnetic discs positioned within the drum. These special permanent magnets generate particularly high field gradients which are necessary for successful separation, as is the need with all magnetic separators.

Wet drum magnets have high magnetic recovery and discharge The feed slurries recover the magnetic. It is available in single or multiple drum applications. The drum is made from thick stainless steel for long service life. Wet drum separators are available in different configuration like single drum, double drum and multiple drum.

For more details please visit our website: http://www.excelmagnetics.com/wet-drum-magnetic-separator.php

 

 

Over Band Magnetic Separator

Over Band Magnetic Separators are designed to eliminate tramp metal from the product carried by belt, Used in Recycling, quarrying and heavy industries.

Positioned above flat or trough type conveyors to continuously removed tramp iron and other ferrous contamination from bulk items. Large permanent magnetic packs generate deep penetrating magnetic flux fields.

Rubber belt is driven around two rollers with the magnetic pack positioned in the centre. Other separators used over conveyor belts include: conveyor head rollers, strip magnets, hinged strip magnets, deep field plate magnets.

The Magnet is made of High Intensity Strontium Ferrite Magnets and Rare Earth magnet are  guaranteed for the Magnetic Power through out the life of installation. A Non - Magnetic Stainless steel Plate is provided to cover the poles of Magnet. There is no need for any electrical supply or maintenance. 

For more details our product please visit our website: http://excelmagnetics.com/over-band-magnetic-separator.php

Magnetic Pulley

The magnetic head pulley replaces the drive pulley at the end of conveyor belts. In view of the wide variety of conveyor belt types, the magnetic pulley is supplied made to measure and ready for installation. As the figure clearly show, the magnetic head roller extracts the iron particles from the material flow and carries them to the underside of the belt where they are removed and collected.

The version with permanent magnets are fitted with powerful and An-Isotropic Hard ferrite Magnets /high intensity Nd - Feb Rare Earth Magnets and operate without the need for power supplies. The magnet system is available in two types: with Longitudinal polar field distribution for use with low levels of iron contamination and thin material layers, and with lateral polar field distribution for greater material thickness and larger iron particles.

Finally as the belt leaves the magnetic pulley, the magnetism dissipates and the unwanted contamination falls from under the belt into a separate receptacle.

For more details please visit our website: http://www.excelmagnetics.com/magnetic-pulley.php

Suspended Magnet

This unit simply suspended above the conveyor belt or the head pulley and lifts tramp metal from the product burden as it passes through the powerful magnetic field. Four eyebolts are provided for suspension (suspension chain not included). Cleaning is achieved by manually removing the collected tramp metal from the face of the magnet. E-Z CLEAN options are available to simplify cleaning. Available in permanent and electromagnetic designs.

Suspension Type Magnets use is recommended for low contamination products. Over band type Magnetic Separator is recommended for this type of application. The capacity of suspended magnet is 20 inch coverage area

The principal applications are for processing of bulk products such as Culets, Glass, Cofee, Cereals, Minerals, Coal and Sugar etc.,

For more details click here