Channel Magnet

Channel Plate Magnets are important industrial separators that are meant for the separation of fine ferrous materials and large pieces of tramp iron, from many types of free-flowing and pneumatically conveyed material like corn, sugar, flour, gravel, plastic and others granular materials. It’s a one kind of plate magnet only two side border of plate magnet.

The channel plate magnets also goes very well with powdery, moist, lumpy, and abrasive products and large debris that might choke, bridge, or cause rapid wear in cartridge-based separators. Plate magnets are flexible enough to be deployed above conveyors or below conveyor drive pulleys to capture contaminants. for more details please click here…

Plate Magnet

Plate Magnets are designed for use in chutes and suspension over conveyed product. Installed on the bottom side of a chute, a Plate Magnet will provide maximum protection as product travels through the powerful magnetic circuit. The magnetic field projects from the face of the Plate Magnet reaching into the product stream and pulling the ferrous contaminants to the magnet face. The magnetic field on a Plate Magnet is strongest at the surface and gets weaker the further you move away.

Permanent Magnetic Plates are designed in various sizes & strengths to meet with specific operation & plant conditions. Magnetic Plates are widely used for removing Tramp iron such as Bolts, Nuts, Bits of Wire, Nails and other casual containmination from free flowing materials to protect against occasional damage to the plant caused by bits of iron.

Plate Magnets can ideally be used to remove tramp iron from the moving material carried in chutes ducts, spouts or on conveyor belts, screens and feed trays. Whether the material is plastic or paper pulp, food or fertilizer, Oil seeds or gains the result is sure protection of processing machinery and iron free final products.

Do not hesitated to contact us at http://www.excelmagnetics.com/plate-magnet.php, info@excelmagnetics.com  & call us +91 79 6450 3537 , +91 79 2290 0055

Rod Type Channel Magnet

Rod Type Channel Magnets is made for slurry or grinding material, it captured ferrous contaminants from being washed off from oncoming product, a trap face design should be chosen. A trap face is a tapered step on the magnets working surface. This trap is placed at a position within the north and south magnetic fields that cause captured ferrous contaminants to be drawn to the underside of the trap where they are safely held on to, preventing was hoff from oncoming product.

In rod type channel Magnets usually have a 1” or 1.5” inch magnetic rods The magnetic configuration ensures maximum exposure of contamination to the high intensity rods without impeding liquid flow.

Channel Magnet are available in double wall jacketed. In s.s.304 and 316 steel, designs capable of working at unlimited magnetic bar are available on request.

For more details please visit our website: http://www.excelmagnetics.com/rod-type-channel-magnet.php