Plate Magnet

Plate Magnets are designed for use in chutes and suspension over conveyed product. Installed on the bottom side of a chute, a Plate Magnet will provide maximum protection as product travels through the powerful magnetic circuit. The magnetic field projects from the face of the Plate Magnet reaching into the product stream and pulling the ferrous contaminants to the magnet face. The magnetic field on a Plate Magnet is strongest at the surface and gets weaker the further you move away.

Permanent Magnetic Plates are designed in various sizes & strengths to meet with specific operation & plant conditions. Magnetic Plates are widely used for removing Tramp iron such as Bolts, Nuts, Bits of Wire, Nails and other casual containmination from free flowing materials to protect against occasional damage to the plant caused by bits of iron.

Plate Magnets can ideally be used to remove tramp iron from the moving material carried in chutes ducts, spouts or on conveyor belts, screens and feed trays. Whether the material is plastic or paper pulp, food or fertilizer, Oil seeds or gains the result is sure protection of processing machinery and iron free final products.

Do not hesitated to contact us at http://www.excelmagnetics.com/plate-magnet.php, info@excelmagnetics.com  & call us +91 79 6450 3537 , +91 79 2290 0055

Rod Type Channel Magnet

Rod Type Channel Magnets is made for slurry or grinding material, it captured ferrous contaminants from being washed off from oncoming product, a trap face design should be chosen. A trap face is a tapered step on the magnets working surface. This trap is placed at a position within the north and south magnetic fields that cause captured ferrous contaminants to be drawn to the underside of the trap where they are safely held on to, preventing was hoff from oncoming product.

In rod type channel Magnets usually have a 1” or 1.5” inch magnetic rods The magnetic configuration ensures maximum exposure of contamination to the high intensity rods without impeding liquid flow.

Channel Magnet are available in double wall jacketed. In s.s.304 and 316 steel, designs capable of working at unlimited magnetic bar are available on request.

For more details please visit our website: http://www.excelmagnetics.com/rod-type-channel-magnet.php

Electro Vibro Feeder

Electro Magnetic Vibro Feeder is ideally suitable for controlling the flow of bulk Materials to secondary processing operation. The resultant force output, amplitude final product conveying speed is readily adjustable on all Feeders The vibrations product are smooth uniform , volumetric flow, that is fully variable with the help of controller.

Motorized Vibro Feeder is also Heavy duty vibratory feeder have welded construction, which transmits vibrations without fatigue. They are built for continuous operation. Each vibro feeder utilizes the forces set up by two synchronized, counter-rotating, heavy-duty, unbalanced Vibratory Motors, which are firmly fixed to the Feeder trough, in a specific angle to the feeding level. Feeders with unbalanced drives vibrate freely on a support spring which is insulated against vibration transmission to base frame.

The both vibratory Feeder are used to control bulk products flow in bulk Handling plants, Like coke, Quartz, Mineral, Cement, Glass and many other industries Compared with other conveying means vibratory feeders have low energy consumption and cause little pollution. They are wear resistant and thus do not influence the quality and character of the product they handle.

Do not hesitated to contact us at http://www.excelmagnetics.com , info@excelmagnetics.com  & call us +91 79 6450 3537 , +91 79 2290 0055

Wet Magnetic Drum Separator

The Wet Magnetic Drum Separator is used to remove very fine magnetisable components from low concentration, low-viscosity liquids. The wet separator is intended for use in the metal processing industry and for the treatment of preconcentrates extracted from the high gradient magnetic filter.

The liquid flows through a semicircular separating chamber beneath a stainless steel drum to which the

magnetisable particles are attracted. The strong, high-gradient magnetic field is created by a cylinder consisting of permanent magnetic discs positioned within the drum. These special permanent magnets generate particularly high field gradients which are necessary for successful separation, as is the need with all magnetic separators.

Wet drum magnets have high magnetic recovery and discharge The feed slurries recover the magnetic. It is available in single or multiple drum applications. The drum is made from thick stainless steel for long service life. Wet drum separators are available in different configuration like single drum, double drum and multiple drum.

For more details please visit our website: http://www.excelmagnetics.com/wet-drum-magnetic-separator.php

 

 

Over Band Magnetic Separator

Over Band Magnetic Separators are designed to eliminate tramp metal from the product carried by belt, Used in Recycling, quarrying and heavy industries.

Positioned above flat or trough type conveyors to continuously removed tramp iron and other ferrous contamination from bulk items. Large permanent magnetic packs generate deep penetrating magnetic flux fields.

Rubber belt is driven around two rollers with the magnetic pack positioned in the centre. Other separators used over conveyor belts include: conveyor head rollers, strip magnets, hinged strip magnets, deep field plate magnets.

The Magnet is made of High Intensity Strontium Ferrite Magnets and Rare Earth magnet are  guaranteed for the Magnetic Power through out the life of installation. A Non - Magnetic Stainless steel Plate is provided to cover the poles of Magnet. There is no need for any electrical supply or maintenance. 

For more details our product please visit our website: http://excelmagnetics.com/over-band-magnetic-separator.php